Education – Placement Tips

Placement Tips

  • T-Shirt: Full Front
    • Locate vertical center: Follow print line in shirt
    • Locate horizontal center: Line from bottom of one arm seem to the other.
    • Make sure shirt tag is centered.
    Watch Application Video
  • T-Shirt: Left Chest
    • 7.5″-9″ from shoulder’s left seam and 4″-6″ from the center. OR locate vertical center: Where neck and sleeve meet.
    • Locate horizontal center: Line from bottom of one arm seem to the other.

    Tip: Consider lowering the design slightly if it is tall/vertical.

  • Golf Shirt
    • 7.5″-9″ from shoulder’s left seam and 4″-6″ from the center.

    Tip: Raise the print area to avoid buttons on shirt with a Print Perfect Pad

  • Sweatshirt
    • Top of the design 3″-3.5″ from the bottom of neck’s edging.
  • Jersey
    • Top of the design 2″-3″ or 2.5″-3″ from the bottom of the neck’s edging.
  • Long-Sleeve Shirt
    • Locate fold line along length of sleeve.
    • Place edge of design as close as possible to fold.
    Watch Application Video
  • Short-Sleeve Shirt
    • Locate sleeve fold to use as vertical center.
    • To avoid seam on reverse side, apply design with cap press or cap press platen.
    • Tip: Use a Print Perfect Pad if you don’t have a cap press or cap press platen.

  • Pant Leg
    • Position design as close as possible to pant leg fold line.
    • Although not perfectly centered, design will look properly positioned when pants are worn.
    Watch Application Video